IoT-Based Preventive Maintenance in Wood Processing: Energy, Water, Vibration and Sound Monitoring

Wood biomass pellets production facility

In industrial production, the most expensive maintenance event is always the one you did not see coming. Aksel Treyd, a fast-growing wood processing company with an annual production capacity of 20,000 units, partnered with UtilTex to deploy a multi-signal IoT monitoring system that combines energy metering, water monitoring, vibration sensing, and acoustic analysis into a single predictive maintenance platform. The approach transforms raw utility and sensor data into an early warning system for equipment health.

The Limits of Traditional Maintenance in Wood Processing

Wood processing is mechanically demanding. Saws, planers, moulders, conveyors, and dust extraction systems run under continuous load and degrade in predictable ways – but only if you are measuring the right signals. Before implementing UtilTex monitoring, Aksel Treyd had no real-time visibility into individual machine performance. Maintenance was scheduled on fixed intervals or triggered by breakdown. Neither approach was adequate:

  • Machines left running after shift end accumulated unnecessary wear and consumed energy with no production output
  • Equipment degradation went undetected until it caused a fault, often damaging downstream components in the process
  • Water leaks in production systems were invisible until unexplained spikes appeared on utility bills
  • There was no way to correlate energy consumption increases with the need for mechanical inspection

A Four-Signal Approach to Predictive Maintenance

UtilTex deployed ThingsLog IoT instrumentation at individual machine level across the Aksel Treyd facility, monitoring four complementary signals that together provide a comprehensive picture of equipment health:

1. Energy Consumption

Increased energy draw in rotating equipment is one of the earliest indicators of mechanical wear. A motor working harder than usual to drive the same load is signalling friction, misalignment, bearing degradation, or lubrication failure. UtilTex establishes consumption baselines per machine and alerts maintenance when any machine deviates from its profile – enabling intervention during planned downtime rather than after a breakdown.

2. Water Consumption

Water plays a critical role in wood processing – in cooling, dust suppression, and finishing. Continuous flow monitoring at machine and zone level detects leaks and valve faults in near real-time. Unexpected consumption between production shifts is a reliable indicator of a developing infrastructure problem that would otherwise remain invisible until the next meter reading.

3. Vibration Monitoring

Vibration is the most direct signal of mechanical condition in rotating and reciprocating machinery. UtilTex vibration sensors mounted on critical machines continuously measure amplitude and frequency patterns. Deviations from normal vibration signatures indicate specific fault types: bearing wear produces characteristic high-frequency signatures, imbalance creates rotational-frequency vibration, and looseness appears as harmonic patterns. This allows maintenance teams to identify not just that a machine needs attention, but what kind of intervention is required.

4. Acoustic Monitoring

Sound complements vibration data by capturing fault signatures that structural sensors may not pick up – particularly in cutting equipment where blade wear, tooth damage, or feed rate problems manifest as distinctive acoustic changes. UtilTex acoustic monitoring on saws and cutting machinery detects these signatures early, enabling blade replacements and adjustments to be scheduled before quality defects appear in the product or the machine is damaged.

From Data to Maintenance Decision

All four signals are aggregated in the UtilTex platform, where they are correlated and displayed as a unified equipment health view. When a machine shows simultaneous increases in energy consumption and vibration amplitude, that combination points strongly to bearing degradation – and the maintenance team can schedule a bearing replacement at the next convenient stop, rather than waiting for a catastrophic failure that takes out the entire line. The production manager has live visibility into the health of every monitored asset at all times.

Results

  • Bearing and mechanical failures predicted weeks in advance through correlated energy and vibration data
  • Blade wear and cutting equipment degradation detected acoustically before product quality is affected
  • Water leaks identified in near real-time through continuous flow monitoring
  • Machines left running after shifts flagged automatically – reducing unnecessary wear and energy waste
  • Maintenance scheduled around production rather than production stopping for emergency repairs
  • Accurate energy and water cost allocation to individual production runs

This case study is powered by UtilTex using ThingsLog IoT monitoring technology.